Link-systems System 1100 Tonnage Monitor Uživatelský manuál stáhnout pdf (Strana 106)

ERROR CODES

___________________________________________________________________

Error No. Message / Action

10-3

2) If running at speeds greater than 500 SPM a

zeroing cam switch should be installed.

031 Supply Voltage too low.

When the operator attempts to change information

stored in the non-volatile memory of the System 1100

the power supply voltage is first checked for the

proper level. If the proper level does not exist,

the System 1100 will not change data in the non-

volatile memory and this error will result.

1) For self-contained System 1100 Tonnage Monitors

open the front door of the enclosure and

visually inspect the four power supply indicator

lights for uniform and proper brightness.

For remote display System 1100 Tonnage Monitors

open the back of the Operator Interface Terminal

and visually inspect the two power supply

indicator lights for uniform and proper

brightness.

2) Check the 110VAC power line to the System 1100

for proper level.

032 Internal Error. Call Factory.

1) Notify Link Systems of this error.

033 Internal Error. Call Factory.

1) Notify Link Systems of this error.

034 Internal Error. Call Factory.

1) Notify Link Systems of this error.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 116 117

Žádné komentáře

Link-systems System 1100 Tonnage Monitor Uživatelský manuál Strana 106